Gantry Welding Machine for Special H Beam
The equipment is special for automobile beam welding, widely used in building steel structure, the crossbeam of the automobile and engineering machinery " H/I " beam welding production, adopts centralized control system. Main composed of Gantry frame, two sets of MZ-1000 submerged arc welding power supply, two sets of horizontal electric mobile slider, two sets of electric hanging head, two sets of automatic tracking mechanism, two sets of flux recovery machine and control system etc.. With high efficiency, good welding quality is the ideal equipment for H type and "I "beam welding.
Height of gantry frame (distance between beam and ground) 1.2m
Torch lifting stroke (Up Down) 200mm
Torch longitudinal travel 700mm
Gantry frame travel motor power 0.75KW×2
Gantry frame travel welding speed 250-1200mm/min
Fast return speed 2880mm/min
Gantry frame Guide rail center distance: 3m (user prepare)
Length of guide rail Customizable
Beam web plate height 150-800mm
Beam pterygoid lamina width 120-800mm
|Height of web(mm)||200-2000|
|Height of flange(mm)||200-800|
|Length of H beam(mm)||4000-15000(can be designed as required)|
|Welder model||MZ-1000 SAW welding power, wire feeding machine, 2unit|
|Power (Kw)||13(welder is exclude)|
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
2) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
3) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.